• available in the versions for reel with liner of • 80mm / 3.15” , 240mm / 9.45” or 330mm / 13″ maximum width • built on a solid aluminium alloy casting. A safe and most robust machine, designed to last over time • little footprint on the production line thanks to its “vertical” development • large diameter reel housing for very long duration • expansion rewinder mandrel • independent motorized rewinder • Advanced control unit, which is independent and can be located wherever most practical for the operator (cables length: 3 metres / 118,10”)
The APLEX4 label applicator is a low cost, automatic label printing and application system that combines high performance and cost effectiveness. Suitable for a wide variety of industrial and manufacturing based environments due to its design, performance, and low cost of ownership. The APLEX4 is designed for use alongside the B-EX4T series of industrial printers, to enable simple integration into any production line. This truly plug and play solution can handle production levels of up to 30 labels per minute and is available in resolutions of 200, 300 and 600dpi.The APLEX4 is designed to support all types of industrial environments, adapting easily to existing production lines.
The Linerless Advanced is a state of the art ecological print & apply.
• speed and liner maximum width depending on Sato S84 print module installed
• built on a solid anodized aluminium alloy plate, with all the components protected by the rear 61 Shore hardness light polymer shell.
• A safe and most robust machine, designed to last over time
• 6 pneumatic solenoid valves with independent blast and suction, to reduce air consumption (suction is suspended when the label is not on the pad)
• emergency push button
• large diameter (360mm / 14.17â€) Linerless reel for very long duration
• paper path rollers numbered for quick loading
• “U arm†for universal positioning
• spray lubrication system for the cutting blade, to minimize the need for cleaning
Equipped with 2.5 inch single colour graphic display, back lit, complete with 4 “smart keys and number keyboard. Multi language menu (Italian, English, French, German, Spanish, Portuguese and Russian), divided for three levels of authority between “operatorâ€, “supervisor†and “maintenance staffâ€. All the most advanced electronic functions, included: Quick Set Up, electronic adjustment of the labeling point on the product, Scanmanager functions for the management of a barcode scanner or of a vision system
• not even one metre of silicon liner to collect or dispose of
• lower purchase cost
• reduction of weight and occupied space, with consequent savings on transport and stocks
• greater capacity of the reels with reduction of replacement operations
The EASYLINER is a competitively priced, efficient print and apply machine which is easy to use for any operator. It is lightweight and has a small footprint allowing it to be integrated into many production lines. The print engine that is supplied is the SATO LT408 which governs the maximum print speed and media width. Built around a solid anodized aluminium alloy plate, with all the components protected by the rear metal shell, the EASYLINER is a safe and robust machine designed to be reliable and hardwearing over many years.
• speed and liner maximum width depending on Sato LT408 print module installed
• built around a solid anodized aluminium alloy plate, with all the components protected by the rear metal shell.
• A safe and robust machine, designed to last over time
• 3 pneumatic solenoid valves
• reel housing (diameter 250mm / 9.84â€)
• liner path rollers numbered for quick loading
• most easy to use, thanks to the multi functional operating button with integrated luminous LED
• alarm reset button
• a luminous LED that signals alarms, machine state, stand-by (activated by external signal) or failure
• two flow regulators to control the exit and return of the pneumatic actuator
• two flow regulators to control the suction and holding force (Air Assist) of the label, at the dispensing stage
The Linerplus is a state of the art print apply, extraordinarily versatile, complete with all kinds of accessories and able to satisfy every possible application need.
• speed and liner maximum width depending on print module installed
• built on a solid anodized aluminium alloy plate, with all the components protected by the rear 61 Shore hardness light polymer shell. A safe and most robust machine, designed to last over time
• 4 pneumatic solenoid valves with independent blast and suction, to reduce air consumption (suction is suspended when the label is not on the pad)
• large diameter (360mm / 14.17â€) reel for long duration
• expansion rewinder manual
• configured for the integration of a Sato or Zebra print module
• built in control panel, with luminous LEDs and soft keys. Otherwise, in the Advanced version, an independent control unit which can be located wherever most practical for the operator (cable length: 3 metres / 9.84 feet)
• four function buttons: alarm reset, stand by, printing and dispensing of a label and label application (cylinder movement)
• four luminous LEDs to signal machine state: working/stand-by, failure, product detection and printing in process
• two flow regulators, to control the exit and return speed of the pneumatic actuator
