• 80mm / 3.15” label liner maximum width • built on a solid aluminium alloy casting. A safe and most robust machine, designed to last over time • large diameter reel housing for very long duration • expansion rewinder mandrel • independent motorized rewinder • Advanced control unit, which is independent and can be located wherever most practical for the operator (cables length 3 metres / 9.84 feet) • advance loop unwinder • 3 brushless motors
• 160mm / 6.30†label liner maximum width
• built on a solid aluminium alloy casting. A safe and most robust machine, designed to last over time
• little footprint on the production line thanks to its “vertical†development
• large diameter reel housing for long duration
• available in pneumatic version too
• dispensing speed
• label position on the peeler (advance dispensing)
• labeling point (application delay) removing the need for manual movement of the product detection sensor.
In addition, a luminous button is available for “single shot†dispensing and alarm resetting
The Linerless Advanced is a state of the art ecological print & apply.
• speed and liner maximum width depending on Sato S84 print module installed
• built on a solid anodized aluminium alloy plate, with all the components protected by the rear 61 Shore hardness light polymer shell.
• A safe and most robust machine, designed to last over time
• 6 pneumatic solenoid valves with independent blast and suction, to reduce air consumption (suction is suspended when the label is not on the pad)
• emergency push button
• large diameter (360mm / 14.17â€) Linerless reel for very long duration
• paper path rollers numbered for quick loading
• “U arm†for universal positioning
• spray lubrication system for the cutting blade, to minimize the need for cleaning
Equipped with 2.5 inch single colour graphic display, back lit, complete with 4 “smart keys and number keyboard. Multi language menu (Italian, English, French, German, Spanish, Portuguese and Russian), divided for three levels of authority between “operatorâ€, “supervisor†and “maintenance staffâ€. All the most advanced electronic functions, included: Quick Set Up, electronic adjustment of the labeling point on the product, Scanmanager functions for the management of a barcode scanner or of a vision system
• not even one metre of silicon liner to collect or dispose of
• lower purchase cost
• reduction of weight and occupied space, with consequent savings on transport and stocks
• greater capacity of the reels with reduction of replacement operations
The Linerplus is a state of the art print apply, extraordinarily versatile, complete with all kinds of accessories and able to satisfy every possible application need.
• speed and liner maximum width depending on print module installed
• built on a solid anodized aluminium alloy plate, with all the components protected by the rear 61 Shore hardness light polymer shell. A safe and most robust machine, designed to last over time
• 4 pneumatic solenoid valves with independent blast and suction, to reduce air consumption (suction is suspended when the label is not on the pad)
• large diameter (360mm / 14.17â€) reel for long duration
• expansion rewinder manual
• configured for the integration of a Sato or Zebra print module
• built in control panel, with luminous LEDs and soft keys. Otherwise, in the Advanced version, an independent control unit which can be located wherever most practical for the operator (cable length: 3 metres / 9.84 feet)
• four function buttons: alarm reset, stand by, printing and dispensing of a label and label application (cylinder movement)
• four luminous LEDs to signal machine state: working/stand-by, failure, product detection and printing in process
• two flow regulators, to control the exit and return speed of the pneumatic actuator
• two flow regulators to control the suction and holding force (Air Assist) of the label, at the dispensing stage
The AG3000T systems match the ZX1000i printer series with high end pneumatic tamp applicatorsfor printing and applying labels on demand. They come with standard applicator heads of either 60mm x 60mm or 100mm x 100mm and can handle any label size from 20mm x 20mm up to 100mm x 200mm with customised heads. Though typically used to label non-moving items on intermittent conveyor systems, in robotised processes or manual workflows they will also label moving items accurately. Various options are available to tune the AG3000T/AG3000-LS to your particular needs.
Complete system with a ZX1200i printer, heavy duty stand, applicator tamp arm (excluding triggering device)
AG3000T – List price £6,830 Delivers an effective stroke of 170mm (total stroke 300mm)
AG3000T-LS – List price £7,308 Delivers an effective stroke of 370mm (total stroke 500mm)