Thanks to a special return it can have variable geometry, with the reel housing in two possible positions or even remoted.
• 120mm / 4.72†label liner maximum width • ideal for installation inside any packaging machine • indipendent control unit which can be located wherever most practical for the operator (cable length: 3 metres / 9.84 feet)
Very easy to use thanks to all the controls being concentrated in a single panel including 3 multiturn potentiometers (with blocking device) to adjust:
• dispensing speed • label position on the peeler (advance dispensing) • labeling point (application delay) removing the need for manual movement of the product detection sensor.
In addition, a luminous button is available for “single shot†dispensing and alarm resetting. Basic 120 can grow on the base of the customer needs. Substituting the control unit only, the labeler is upgradable to the Dynamic model.
The APLEX4 label applicator is a low cost, automatic label printing and application system that combines high performance and cost effectiveness. Suitable for a wide variety of industrial and manufacturing based environments due to its design, performance, and low cost of ownership. The APLEX4 is designed for use alongside the B-EX4T series of industrial printers, to enable simple integration into any production line. This truly plug and play solution can handle production levels of up to 30 labels per minute and is available in resolutions of 200, 300 and 600dpi.The APLEX4 is designed to support all types of industrial environments, adapting easily to existing production lines.
The EASYLINER is a competitively priced, efficient print and apply machine which is easy to use for any operator. It is lightweight and has a small footprint allowing it to be integrated into many production lines. The print engine that is supplied is the SATO LT408 which governs the maximum print speed and media width. Built around a solid anodized aluminium alloy plate, with all the components protected by the rear metal shell, the EASYLINER is a safe and robust machine designed to be reliable and hardwearing over many years.
• speed and liner maximum width depending on Sato LT408 print module installed
• built around a solid anodized aluminium alloy plate, with all the components protected by the rear metal shell.
• A safe and robust machine, designed to last over time
• 3 pneumatic solenoid valves
• reel housing (diameter 250mm / 9.84â€)
• liner path rollers numbered for quick loading
• most easy to use, thanks to the multi functional operating button with integrated luminous LED
• alarm reset button
• a luminous LED that signals alarms, machine state, stand-by (activated by external signal) or failure
• two flow regulators to control the exit and return of the pneumatic actuator
• two flow regulators to control the suction and holding force (Air Assist) of the label, at the dispensing stage
The AG2000 is definitely the most cost-efficient print & apply solution around for optimising end-of-line labelling process as it offers high flexibility, extreme durability and ease-of-use at a low cost. This system has been developed to print and apply labels onto moving boxes and products that are being transported on a conveyor. It utilises a roll-on applicator head which can allow for the labelling of irregular shaped objects as well. In order to provide a ready-to-use and easy installable solution, Godex offers all items you need to complete your system. The AG2000 systems can be used with a number of different Godex printers including the EZi and ZX 4inch width printers depending on the printhead dpi required and the conveyor line speed.
