The AG1000F is a high end but affordable semi-automatic applicator capable of applying labels onto a vast range of cylindric products with diameters ranging from 20mm up to 120mm.
Attached to a GoDEX printer of the ZX1000i series it forms a perfect print & apply solution for medium-sized breweries, wineries, butchers, manufacturers of cosmetics, contract packers and others who produce or distribute products in jars, cans, pots and bottles.
Thanks to its innovative design the AG1000F is probably the most versatile of its kind, as well as extremely user-friendly.
Adjusting it to a given product is a matter of minutes, if not seconds.
Special optional stoppers and stopper bars enable fast and secure labelling of odd shaped products and with the optional sensor bottles can be labelled on two sides.
The Linerplus is a state of the art print apply, extraordinarily versatile, complete with all kinds of accessories and able to satisfy every possible application need.
• speed and liner maximum width depending on print module installed
• built on a solid anodized aluminium alloy plate, with all the components protected by the rear 61 Shore hardness light polymer shell. A safe and most robust machine, designed to last over time
• 4 pneumatic solenoid valves with independent blast and suction, to reduce air consumption (suction is suspended when the label is not on the pad)
• emergency push button
• large diameter (360mm / 14.17â€) reel for long duration
• paper path rollers numbered for quick loading
• expansion rewinder manual
• “U arm†for universal positioning
• configured for the integration of a Sato or Zebra print module
• built in control panel, with luminous LEDs and soft keys. Otherwise, in the Advanced version, an independent control unit which can be located wherever most practical for the operator (cable length: 3 metres / 9.84 feet)
• four function buttons: alarm reset, stand by, printing and dispensing of a label and label application (cylinder movement)
• four luminous LEDs to signal machine state: working/stand-by, failure, product detection and printing in process
• two flow regulators, to control the exit and return speed of the pneumatic actuator
• two flow regulators to control the suction and holding force (Air Assist) of the label, at the dispensing stage
The APLEX4 label applicator is a low cost, automatic label printing and application system that combines high performance and cost effectiveness. Suitable for a wide variety of industrial and manufacturing based environments due to its design, performance, and low cost of ownership. The APLEX4 is designed for use alongside the B-EX4T series of industrial printers, to enable simple integration into any production line. This truly plug and play solution can handle production levels of up to 30 labels per minute and is available in resolutions of 200, 300 and 600dpi.The APLEX4 is designed to support all types of industrial environments, adapting easily to existing production lines.
Thanks to a special return it can have variable geometry, with the reel housing in two possible positions or even remoted.
• 120mm / 4.72†label liner maximum width • ideal for installation inside any packaging machine • indipendent control unit which can be located wherever most practical for the operator (cable length: 3 metres / 9.84 feet)
Very easy to use thanks to all the controls being concentrated in a single panel including 3 multiturn potentiometers (with blocking device) to adjust:
• dispensing speed • label position on the peeler (advance dispensing) • labeling point (application delay) removing the need for manual movement of the product detection sensor.
In addition, a luminous button is available for “single shot†dispensing and alarm resetting. Basic 120 can grow on the base of the customer needs. Substituting the control unit only, the labeler is upgradable to the Dynamic model.
The EASYLINER is a competitively priced, efficient print and apply machine which is easy to use for any operator. It is lightweight and has a small footprint allowing it to be integrated into many production lines. The print engine that is supplied is the SATO LT408 which governs the maximum print speed and media width. Built around a solid anodized aluminium alloy plate, with all the components protected by the rear metal shell, the EASYLINER is a safe and robust machine designed to be reliable and hardwearing over many years.
• speed and liner maximum width depending on Sato LT408 print module installed
• built around a solid anodized aluminium alloy plate, with all the components protected by the rear metal shell.
• A safe and robust machine, designed to last over time
• 3 pneumatic solenoid valves
• reel housing (diameter 250mm / 9.84â€)
• liner path rollers numbered for quick loading
• most easy to use, thanks to the multi functional operating button with integrated luminous LED
• alarm reset button
• a luminous LED that signals alarms, machine state, stand-by (activated by external signal) or failure
• two flow regulators to control the exit and return of the pneumatic actuator
