The AG3000T systems match the ZX1000i printer series with high end pneumatic tamp applicatorsfor printing and applying labels on demand. They come with standard applicator heads of either 60mm x 60mm or 100mm x 100mm and can handle any label size from 20mm x 20mm up to 100mm x 200mm with customised heads. Though typically used to label non-moving items on intermittent conveyor systems, in robotised processes or manual workflows they will also label moving items accurately. Various options are available to tune the AG3000T/AG3000-LS to your particular needs.
Complete system with a ZX1200i printer, heavy duty stand, applicator tamp arm (excluding triggering device)
AG3000T – List price £6,830 Delivers an effective stroke of 170mm (total stroke 300mm)
AG3000T-LS – List price £7,308 Delivers an effective stroke of 370mm (total stroke 500mm)
The Linerplus is a state of the art print apply, extraordinarily versatile, complete with all kinds of accessories and able to satisfy every possible application need.
• speed and liner maximum width depending on print module installed
• built on a solid anodized aluminium alloy plate, with all the components protected by the rear 61 Shore hardness light polymer shell. A safe and most robust machine, designed to last over time
• 4 pneumatic solenoid valves with independent blast and suction, to reduce air consumption (suction is suspended when the label is not on the pad)
• emergency push button
• large diameter (360mm / 14.17â€) reel for long duration
• paper path rollers numbered for quick loading
• expansion rewinder manual
• “U arm†for universal positioning
• configured for the integration of a Sato or Zebra print module
• built in control panel, with luminous LEDs and soft keys. Otherwise, in the Advanced version, an independent control unit which can be located wherever most practical for the operator (cable length: 3 metres / 9.84 feet)
• four function buttons: alarm reset, stand by, printing and dispensing of a label and label application (cylinder movement)
• four luminous LEDs to signal machine state: working/stand-by, failure, product detection and printing in process
• two flow regulators, to control the exit and return speed of the pneumatic actuator
• two flow regulators to control the suction and holding force (Air Assist) of the label, at the dispensing stage
• 160mm / 6.30†label liner maximum width
• built on a solid aluminium alloy casting. A safe and most robust machine, designed to last over time
• little footprint on the production line thanks to its “vertical†development
• large diameter reel housing for long duration
• available in pneumatic version too
• dispensing speed
• label position on the peeler (advance dispensing)
• labeling point (application delay) removing the need for manual movement of the product detection sensor.
In addition, a luminous button is available for “single shot†dispensing and alarm resetting
The APLEX4 label applicator is a low cost, automatic label printing and application system that combines high performance and cost effectiveness. Suitable for a wide variety of industrial and manufacturing based environments due to its design, performance, and low cost of ownership. The APLEX4 is designed for use alongside the B-EX4T series of industrial printers, to enable simple integration into any production line. This truly plug and play solution can handle production levels of up to 30 labels per minute and is available in resolutions of 200, 300 and 600dpi.The APLEX4 is designed to support all types of industrial environments, adapting easily to existing production lines.
The Linerless is a state of the art ecological print & apply.
• speed and liner maximum width depending on Sato S84 print module installed
• built on a solid anodized aluminium alloy plate, with all the components protected by the rear 61 Shore hardness light polymer shell.
• A safe and most robust machine, designed to last over time
• 6 pneumatic solenoid valves with independent blast and suction, to reduce air consumption (suction is suspended when the label is not on the pad)
• large diameter (360mm / 14.17â€) Linerless reel for very long duration
• spray lubrication system for the cutting blade, to minimize the need for cleaning
• built in control panel, with luminous LEDs and soft keys (same functions of the Linerplus model)
• not even one metre of silicon liner to collect or dispose of
• lower purchase cost
• reduction of weight and occupied space, with consequent savings on transport and stocks
• greater capacity of the reels with reduction of replacement operations
