The Linerplus is a state of the art print apply, extraordinarily versatile, complete with all kinds of accessories and able to satisfy every possible application need.
• speed and liner maximum width depending on print module installed
• built on a solid anodized aluminium alloy plate, with all the components protected by the rear 61 Shore hardness light polymer shell. A safe and most robust machine, designed to last over time
• 4 pneumatic solenoid valves with independent blast and suction, to reduce air consumption (suction is suspended when the label is not on the pad)
• emergency push button
• large diameter (360mm / 14.17”) reel for long duration
• paper path rollers numbered for quick loading
• expansion rewinder manual
• “U arm” for universal positioning
• configured for the integration of a Sato or Zebra print module
• built in control panel, with luminous LEDs and soft keys. Otherwise, in the Advanced version, an independent control unit which can be located wherever most practical for the operator (cable length: 3 metres / 9.84 feet)
• four function buttons: alarm reset, stand by, printing and dispensing of a label and label application (cylinder movement)
• four luminous LEDs to signal machine state: working/stand-by, failure, product detection and printing in process
• two flow regulators, to control the exit and return speed of the pneumatic actuator
• two flow regulators to control the suction and holding force (Air Assist) of the label, at the dispensing stage
Thanks to a special return it can have variable geometry, with the reel housing in two possible positions or even remoted.
• 120mm / 4.72†label liner maximum width • ideal for installation inside any packaging machine • indipendent control unit which can be located wherever most practical for the operator (cable length: 3 metres / 9.84 feet)
Very easy to use thanks to all the controls being concentrated in a single panel including 3 multiturn potentiometers (with blocking device) to adjust:
• dispensing speed • label position on the peeler (advance dispensing) • labeling point (application delay) removing the need for manual movement of the product detection sensor.
In addition, a luminous button is available for “single shot†dispensing and alarm resetting. Basic 120 can grow on the base of the customer needs. Substituting the control unit only, the labeler is upgradable to the Dynamic model.
The AG2000 is definitely the most cost-efficient print & apply solution around for optimising end-of-line labelling process as it offers high flexibility, extreme durability and ease-of-use at a low cost. This system has been developed to print and apply labels onto moving boxes and products that are being transported on a conveyor. It utilises a roll-on applicator head which can allow for the labelling of irregular shaped objects as well. In order to provide a ready-to-use and easy installable solution, Godex offers all items you need to complete your system. The AG2000 systems can be used with a number of different Godex printers including the EZi and ZX 4inch width printers depending on the printhead dpi required and the conveyor line speed.
• 120mm / 4.72†label liner maximum width
• Ideal for installation inside any packaging machine
• Advanced control unit, which is independent and can be located wherever most practical for the operator (cable length: 3 metres / 9.84 feet)
The Arca solution for easy opening of shrink wrapped packets. Pulling the self adhesive label, the user can quickly free the contents from the plastic wrapping, without getting dirty or contaminating the product
The Linerless Advanced is a state of the art ecological print & apply.
• speed and liner maximum width depending on Sato S84 print module installed
• built on a solid anodized aluminium alloy plate, with all the components protected by the rear 61 Shore hardness light polymer shell.
• A safe and most robust machine, designed to last over time
• 6 pneumatic solenoid valves with independent blast and suction, to reduce air consumption (suction is suspended when the label is not on the pad)
• emergency push button
• large diameter (360mm / 14.17â€) Linerless reel for very long duration
• paper path rollers numbered for quick loading
• “U arm†for universal positioning
• spray lubrication system for the cutting blade, to minimize the need for cleaning
Equipped with 2.5 inch single colour graphic display, back lit, complete with 4 “smart keys and number keyboard. Multi language menu (Italian, English, French, German, Spanish, Portuguese and Russian), divided for three levels of authority between “operatorâ€, “supervisor†and “maintenance staffâ€. All the most advanced electronic functions, included: Quick Set Up, electronic adjustment of the labeling point on the product, Scanmanager functions for the management of a barcode scanner or of a vision system
• not even one metre of silicon liner to collect or dispose of
• lower purchase cost
• reduction of weight and occupied space, with consequent savings on transport and stocks
• greater capacity of the reels with reduction of replacement operations