Thanks to a special return it can have variable geometry, with the reel housing in two possible positions or even remoted.
• 120mm / 4.72” label liner maximum width • ideal for installation inside any packaging machine • indipendent control unit which can be located wherever most practical for the operator (cable length: 3 metres / 9.84 feet)
Very easy to use thanks to all the controls being concentrated in a single panel including 3 multiturn potentiometers (with blocking device) to adjust:
• dispensing speed • label position on the peeler (advance dispensing) • labeling point (application delay) removing the need for manual movement of the product detection sensor.
In addition, a luminous button is available for “single shot” dispensing and alarm resetting. Basic 120 can grow on the base of the customer needs. Substituting the control unit only, the labeler is upgradable to the Dynamic model.
The Linerless is a state of the art ecological print & apply.
• speed and liner maximum width depending on Sato S84 print module installed
• built on a solid anodized aluminium alloy plate, with all the components protected by the rear 61 Shore hardness light polymer shell.
• A safe and most robust machine, designed to last over time
• 6 pneumatic solenoid valves with independent blast and suction, to reduce air consumption (suction is suspended when the label is not on the pad)
• emergency push button
• large diameter (360mm / 14.17â€) Linerless reel for very long duration
• paper path rollers numbered for quick loading
• “U arm†for universal positioning
• spray lubrication system for the cutting blade, to minimize the need for cleaning
• built in control panel, with luminous LEDs and soft keys (same functions of the Linerplus model)
• not even one metre of silicon liner to collect or dispose of
• lower purchase cost
• reduction of weight and occupied space, with consequent savings on transport and stocks
• greater capacity of the reels with reduction of replacement operations
• available in the versions for reel with liner of • 80mm / 3.15†, 240mm / 9.45†or 330mm / 13″ maximum width • built on a solid aluminium alloy casting. A safe and most robust machine, designed to last over time • little footprint on the production line thanks to its “vertical†development • large diameter reel housing for very long duration • expansion rewinder mandrel • independent motorized rewinder • Advanced control unit, which is independent and can be located wherever most practical for the operator (cables length: 3 metres / 118,10â€)
The Linerplus is a state of the art print apply, extraordinarily versatile, complete with all kinds of accessories and able to satisfy every possible application need.
• speed and liner maximum width depending on print module installed
• built on a solid anodized aluminium alloy plate, with all the components protected by the rear 61 Shore hardness light polymer shell. A safe and most robust machine, designed to last over time
• 4 pneumatic solenoid valves with independent blast and suction, to reduce air consumption (suction is suspended when the label is not on the pad)
• large diameter (360mm / 14.17â€) reel for long duration
• expansion rewinder manual
• configured for the integration of a Sato or Zebra print module
• Equipped with 2.5 inch single color graphic display, back lit, complete with 4 “smart keys and number keyboard. Multi language menu (Italian, English, French, German, Spanish, Portuguese and Russian), divided for three levels of authority between “operatorâ€, “supervisor†and “maintenance staffâ€
• Quick Set Up for the rapid start
• “recovery of label missingâ€
• instant display of output
• electronic adjustment of the labeling point on the product. There is no need for manual movement of the sensor
• resettable counter
• “match to variable speedâ€
• “multi applicationâ€
• “alternate applicationâ€
• possibility of graphic interface via the Inspector control unit while machine running
• Scanmanager functions for the management of a barcode scanner or of a vision system, with: • barcode presence and readability check • set data conformance check • ejector activation • count up of correct/wrong “readingsâ€
The AG1000F is a high end but affordable semi-automatic applicator capable of applying labels onto a vast range of cylindric products with diameters ranging from 20mm up to 120mm.
Attached to a GoDEX printer of the ZX1000i series it forms a perfect print & apply solution for medium-sized breweries, wineries, butchers, manufacturers of cosmetics, contract packers and others who produce or distribute products in jars, cans, pots and bottles.
Thanks to its innovative design the AG1000F is probably the most versatile of its kind, as well as extremely user-friendly.
Adjusting it to a given product is a matter of minutes, if not seconds.
Special optional stoppers and stopper bars enable fast and secure labelling of odd shaped products and with the optional sensor bottles can be labelled on two sides.
